Saturday, 27 August 2016

Navya - My Heart Goes All (Music) - Guitar Tabs

🎉🎊 We Are Revamping! Finally! ðŸŽŠðŸŽ‰

 After getting so much support and love from you guys ❤️, 
I decided to start a new blog. 
We are migrating from Blogspot to a WordPress based personal website/blog!
  
So this blog will be archived from now onwards and will no longer be updated.
For all the new blog posts & exciting things bookmark my new blog/website.

!! These are the new links !!


Hoping for lots of support and love from you all ❤️
Stay Tuned ðŸ˜‰

The name of the song is 'My Heart Goes All Dhin Tana' from the TV Serial 'Navya' by Star Plus.

Anant - Shaheer Sheikh
Navya - Soumya Seth
--------------------------------------------------------------------------------------------------------------------------
The Tabs are for the guitar piece played in the song.

I couldn't find any good tabs on the internet (and I loved the music), so I made the tabs for you guys :) I hope you like it ;) Have fun :) 




Share this with your friends :) Like and subscribe ;) 
Stay Tuned :)

Saturday, 20 February 2016

Personalize Your Movie/TV Series Collection [Change Folder Icons Permanently]

🎉🎊 We Are Revamping! Finally! ðŸŽŠðŸŽ‰

 After getting so much support and love from you guys ❤️, 
I decided to start a new blog. 
We are migrating from Blogspot to a WordPress based personal website/blog!
  
So this blog will be archived from now onwards and will no longer be updated.
For all the new blog posts & exciting things bookmark my new blog/website.

!! These are the new links !!


Hoping for lots of support and love from you all ❤️
Stay Tuned ðŸ˜‰

This post is for all the TV serial/Movie Lovers :) 

So are you a Movie/TV serial fan? 
If yes then how about personalizing your collection? How about changing the folder Icons and turning them to look like mine? [Check the above pic].

Yes I know it looks cool. Watch the Video Tutorial regarding 'Changing your folder Icon Permanently' & Have fun :)



I hope you liked the video :) 
If you want a folder icon for a particular movie or serial and you don't find it on the internet then just request it & I will make them for you :)

Download Folder Icons created by Viraj From here.

Requests and suggestions are welcomed in the form of comments.
Thank you for reading.
Follow my blog & stay tuned :)

Saturday, 13 February 2016

#6 Connect Raspberry Pi to Laptop/Computer directly.

🎉🎊 We Are Revamping! Finally! ðŸŽŠðŸŽ‰

 After getting so much support and love from you guys ❤️, 
I decided to start a new blog. 
We are migrating from Blogspot to a WordPress based personal website/blog!
  
So this blog will be archived from now onwards and will no longer be updated.
For all the new blog posts & exciting things bookmark my new blog/website.

!! These are the new links !!


Hoping for lots of support and love from you all ❤️
Stay Tuned ðŸ˜‰


This is the 6th post on the Raspberry Pi tutorial.
If you want the list of posts click here. 
Many of you must be wondering why this separate post for connection? Well, there are some complications when you don't have a router & you connect the Raspberry Pi to the Laptop/Computer directly. Let's take a brief look at the complication :)

Explanation somewhat goes this way, the Router has something called DHCP [Dynamic Host Configuration Protocol]. DHCP in layman's language is a method that allocates IP addresses to any device which will be connected to it. So when we connect raspberry pi to the router it assigns an IP address to it and using this address we can communicate with raspberry pi.

The problem arises when we connect the Raspberry Pi to Laptop/Computer. The IP address is not assigned to the Raspberry Pi, so we are not able to communicate with it. Just to mention we might see an IP address if we go to 'Network Adapter Settings' in windows, but unfortunately, we cannot establish a connection using this [Reason is not known to me :-P, comment if you know the answer :)]. Since the IP is not assigned to the RPi we need to assign a static IP address to the RPi. 

Assigning Static IP Address to Raspberry Pi:- 

  • Remove the SD card from the raspberry pi and using a card reader connect it to a computer/laptop.
  • You will see a partition named 'boot'. This partition will be very small, i.e. very less than your SD card size. [Don't worry the remaining partition is Linux based format & hence is not visible on windows computer]. 
  • Open the Cmdline.txt file which is present in the Boot partition. [OPEN THIS TXT FILE USING NOTEPAD++ ONLY]. 
  • Now decide the IP address that you want to allot to the Raspberry Pi. The IP address should lie between 169.254.0.0 – 169.254.255.255. i.e 169.254.xxx.xxx.
  • I will recommend to assign it as 169.254.3.14, last two digits indicate 3.14 i.e. Pi :) This will be easy to remember :)
  • Now the reason for using 169.254.xxx.xxx is because the computers allot the clients IP address between this range. So we will just use any number between this range to establish a connection between computer/laptop and Raspberry Pi.
  • Now we need to type the IP address in the cmdline.txt file, so we will type the following string at the end of the cmdline.txt  "ip = 169.254.3.14". Type that string without any inverted commas.
  • It should look somewhat like this:-



  • Once done with this we are finished! Just enter the card into the Raspberry Pi and connect it to the Computer/Laptop and proceed with this post:- here.
NOTE:- 
  • Once you have edited the cmdline.txt file you cannot connect the Raspberry Pi to the Router. You will have to connect the Raspberry Pi directly to the computer/laptop.
  • Revert the changes and then connect them to the router if you want to use the router as an intermediate between Raspberry Pi and Computer/Laptop.
  • USE NOTEPAD++ FOR EDITING :)
Doubts and suggestions are welcomed in the form of comments.
Thank you for reading.
Follow my blog & stay tuned :)

Sunday, 24 January 2016

Flash CM 13 On Moto E ;)

🎉🎊 We Are Revamping! Finally! ðŸŽŠðŸŽ‰

 After getting so much support and love from you guys ❤️, 
I decided to start a new blog. 
We are migrating from Blogspot to a WordPress based personal website/blog!
  
So this blog will be archived from now onwards and will no longer be updated.
For all the new blog posts & exciting things bookmark my new blog/website.

!! These are the new links !!


Hoping for lots of support and love from you all ❤️
Stay Tuned ðŸ˜‰


Note : Make sure you have unlocked bootloader of your Moto E (Click here if not) & 
you take all the responsibility of your phone !
For Stock Lollipop [flashable] click here.

CyanogenMod is a custom ROM which is available for most of the devices & they are know to solve and fix bugs on time.They regularly update their ROM'S.

If you want the stable and final version of CM 12.1 for condor click here.

CM 13 is a custom ROM made out of STOCK 6.0 i.e. Marshmallow !